 |
The Thetford Fresh Water RV Holding Tank Sanitizer Kit is designed specifically to sanitize interior hard, non-porous surfaces of water holding tanks, drinking water hoses and water coolers. Also, an effective sanitizer for use on food contact surfaces and can be used in RVs, trailers, campers and boats. EPA-Registered for cleaning and sanitizing RV Fresh Water Holding Tanks.
- Chemically-balanced sanitizer even when diluted in hard water
- Will not leave a grit or soap scum
- Not a drinking water additive
- Easy-to-use, 2-part system
- Step 1: Clean tank with detergent and rinse
- Step 2: Sanitize tank with sanitizer
- Use 1 oz of cleaner for every 4 gallons of fresh water to initially clean the tank
- Use 2 oz of sanitizer for every 8 gallons of water ensuring solution contacts all parts of the tank
- Includes: (1) 24 oz. bottle of detergent solution and (1) 24 oz. bottle of sanitizer
NOTE: Hazardous; Cannot be shipped by air; Non-returnable.
Thetford Fresh Water Holding Tank Sanitizer Kit
Directions For Use: 1. Empty the water tank and fill with the proper dosage (1 oz per 4 gallons).
2. Run through all faucets, shower head, ice maker, etc.
- Note: Avoid the hot water heater as it is quite difficult to drain completely.
2. Let it sit for 60 seconds before draining the entire system.
- Note: If the water tank has a drain, that can be used instead of emptying the water tank through all of the faucets.
3. It is recommended to let the system sit dry for a day or two before filling with clean water, but it is not required.
4. Remember to flush the faucets, shower head, ice maker, etc with clean water.
|
|
|
