Electrical
Specifications - Inverter
|
Model |
MS
2012 |
Input battery voltage
range |
9 - 17 VDC |
Nominal AC output
voltage |
120 VAC |
Output frequency and
accuracy |
60 Hz +/- 0.04% |
Total Harmonic
Distortion (THD) |
< 5% |
1 msec surge current
(amps AC) |
50 |
100 msec surge
current (amps AC) |
33 |
5 sec surge power
(real watts) |
3300 |
30 sec surge power
(real watts) |
3100 |
5 min surge power
(real watts) |
2800 |
30 min surge power
(real watts) |
2200 |
Continuous power
output at 45° C |
2000 VA |
Rated input battery
current |
225.0 ADC |
Inverter efficiency
(peak) |
89% |
Transfer time |
16 msecs |
Search mode (typical) |
7 watts |
No load (120 VAC
output, typical) |
25 watts |
Waveform |
Pure Sine Wave |
|
Electrical
Specifications - Charger
|
Model |
MS
2012 |
Continuous output at
25° C |
100 A DC |
Charger efficiency |
85% |
Power factor |
> .95 |
Input current at
rated output |
15 AAC |
|
General
Specifications
|
Model |
MS
2012 |
Transfer relay
capability |
2 legs at 30 A for
120 V/30 A or 240 V/60A service |
Five stage charging
capability |
Bulk, Absorb, Float,
Equalize, and Battery Saver™ |
Battery temperature
compensation |
Yes, 15ft Battery
Temp Sensor standard |
Remote available
(optional) |
Yes, MM-RC or ME-RC |
Internal cooling |
0 to 120 cfm variable
speed drive using dual 92mm brushless DC fans |
Over current
protection |
Yes, with two
overlapping circuits |
Over temperature
protection |
Yes on transformer,
MOSFETS, and battery |
Conformal coating on
PCB’s for corrosion protection |
Yes |
Powder coated chassis
& top for corrosion protection |
Yes |
Stainless steel
fasteners for corrosion protection |
Yes |
Dual AC branch rated
output breakers |
Optional on the
MS2012 - AC breakers in 15 or 20 amp ratings |
Listings |
ETL Listed to UL/cUL
458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
Note: UL pending on MS2024 |
Warranty |
Three (3) years |
|
|
Environmental
Specifications
|
Model |
MS
2012 |
Operating temperature |
-20° C to +60° C (-4°
F to 140° F) |
Nonoperating
temperature |
-40° C to +70° C
(-40° F to 158° F) |
Operating humidity |
0 to 95% RH non
condensing |
|
|
Physical
Specifications
|
Model |
MS
2012 |
Dimensions (H x W x
D) |
13.75” x 12.65” x
8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
Mounting |
Shelf (top or bottom
up) or bulkhead (vents up) |
Weight |
42 lb (17 kg) |
Shipping Weight |
47 lb (21.3 kg) |
Max operating
altitude |
15,000’ (4570 m) |