DIRECTIONS: Empty black holding tank,
and close valve. Add (1) COMMANDO packet
into the empty tank and fill the holding tank full of water. The water level needs to cover all sensors to
allow COMMANDO to penetrate and clean any buildup off the walls and
sensors. Let product sit in tank for 12
to 24 hours. Driving the unit to agitate
can help speed up the process, but is not required. 12 hours is long enough to break down most waste
and paper build-up, but in extreme cases letting the tank sit for 24 hours is
needed. (1) COMMANDO Black Tank Cleaner packet
will treat holding tank capacity of 50 gallons.
CAUTION: KEEP OUT OF REACH OF
CHILDREN. DO NOT PUNCTURE PACKET. Contents of packet cause eye irritation. May
irritate skin and respiratory system. Harmful if swallowed. Avoid breathing
dust from damaged packet and avoid contact with eyes. May cause allergy or asthma symptoms in some
individuals. FIRST AID: If in eyes-
flush eyes with water for 15 minutes. If irritation persists consult a
physician. If on skin-wash with soap and water.
If swallowed-do not induce vomiting. Rinse mouth with water then drink
one or two glasses of water. Consult a physician. Contains: cellulase.
STORAGE & DISPOSAL: Keep packet
dry by resealing slide zipper after use. Store in original container in cool,
dry and well-ventilated area. Avoid contamination of food or feed. Dispose of
empty pouch in trash. DO NOT mix with other chemicals. Read all precautionary
and safe handling information prior to using this product.