Try the Permatex Thread Sealant for use with cylinderblock, rockerarm studs, ring gear bolts, frame bolts, and shock absorber bolts. Used for permanently locking studs and press fits. This product may require heat or special tools for removal.
- Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K).
- High Strength Anaerobic Threadlocking Material That Cures Between Engaged Threads To Form A Unitized Assembly That Resists Virtually All Leakage, Shock And Vibration
- Ideal For All 1/4 Inch To 3/4 Inch Diameter Nut And Bolt Assemblies
- No Mixing, No Curing Outside Of Joint And No Torque Compensation Required During Assembly
- Excellent Chemical Resistance With A Temperature Resistance Range Of Minus 54 Degree Celsius To Plus 150 Degree Celsius (Minus 65 Degree Fahrenheit To Plus 300 Degree Fahrenheit)
- A Single Component, Anaerobic Liquid That Cures When Confined In The Absence Of Air Between Close Fitting Metal Surfaces
- Prevents Rusting Of Threads
- Dissassembly : Requires Heat and Hand Tools
- Strength - High Strength
- 6 Milliliter Tube
- Color: RED
- No Supplier Warranty
- OEM specified
Note: Medium Strength Threadlocker works on metal parts. It is not recommended for plastics. Cured High Strength Threadlocker must be sheared (hand tools will do) before parts will separate.
Note: Cannot be shipped by air.
Permatex 27100 Thread Sealant ; 6 Milliliter Tube (RED)
DIRECTIONS:
1. Clean and dry parts using Permatex® Surface Prep™ activator.
2. Shake tube of High Strength Threadlocker well before each use.
3. Remove cap and snip nozzle tip.
4. Apply High Strength Threadlocker to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information.
|
