 |
 |
 |
|
Ensure safety and prevent tire blowouts by installing the TST TST-507-FT-8 Flow Through Sensor Tire Pressure Monitoring System (TPMS). This system accurately monitors tire pressure and temperature simultaneously in real-time, while offering you the ability to custom program high and low PSI settings on up to 4 axles.
- Sensor Features:
- Detect leaks and temperature variances quickly and reliably.
- Installation wrenches offer protection from theft.
- Powered by user-replaceable batteries (CR1632).
- Flow-through sensors easily allow you to add or remove air, and check tire pressure without removing the sensor.
- Easy to remove during seasonal storage to conserve and extend battery life.
- Replaceable seal for long-lasting durability.
- Each sensor can get programmed individually, so you can monitor per axle.
- Internal memory keeps your settings after battery changes, no need to reprogram.
- Water-resistant.
- Battery Life: Approx. 1 Year.
- Sensor Weight: 0.05 lbs.
- Sensor Dimensions: 2-5/16" Height x 1-1/4" Width x 1-5/16" Depth.
- Note: metal valve stems are required for flow thru sensors.
- Monitor Features:
- Black and white display.
- Monitor the towing vehicle and up to 4 trailers and 115 tires, including spares (additional tire sensors required - sold separately).
- Easily installs with dashboard mount or suction cup mount.
- A large illuminated display shows PSI and temperature simultaneously.
- The built-in rechargeable lithium-ion battery runs up to 36 hours wirelessly.
- Operates on vehicle 12-volt DC or hardware.
- Automatic illumination adapts to any light level.
- Customize high low pressure and temperature thresholds.
- Flashing LED light and audible alarm indicate when pressure or temperature exceeds preset thresholds.
- The range is upwards of 60 linear feet from the tire to monitor.
- Included repeater helps boost the sensor signal to the display. The repeater is used in instances when the distance between the receiver and sensors is greater than 34 ft.
- Read pressure in PSI, BAR, Kpa, Kgf/cm2, and temperatures in F or C.
- Easy to use icons.
- Monitor Weight: 0.4 lbs.
- Dimensions: 4.6" length x 2.99" width x 1.06" depth.
- Includes: (2) Installation wrenches, (6) Flow through sensors, (1) Repeater, (1) Short antenna, (1) Dashboard mounting bracket, (1) Suction cup bracket, (1) Cigarette charger, (1) Hardwire kit, detailed user's manual, and the onboard monitor display
- Limited 3-year manufacturer warranty
507 Monitor Specifications: Operating Temperature: -4 - 176 degrees F (-20 - 80 degrees C), Storage Temperature: -22 - 185 degrees F (-30 - 85 degrees C), Cigarette Plug (Charger) Input Voltage: 5 - 24 VDC, Frequency: 433.92 MHz. 507 Sensor Specifications: Operating Temperature: -40 - 176 degrees F (-40 - 80 degrees C), Pressure Range: 1 - 218 psi TST Flow Through Sensor Tire Pressure Monitoring System - Black & White - 6 Pack
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Differences between the 507RV, 507FT and 510TPMS:
- The 507RV and 507FT is just the type of sensors. The 507RV has regular sensors and the 507FT have flow thru that allow you to add or remove air and check tire pressure with out removing the sensors. The flow thru's are also longer than the regular sensors.
- The differences between the 507 and the 510 are the batteries in the 507 sensors are replaceable and should be replaced once a year. The 510 batteries last 5 years and they are non replaceable, you can send them back to the manufacturer and they will replace them (for a small fee). The 510 sensors are also completely sealed, so they are waterproof, perfect for boat trailers. Lastly the 507 sensors are easier to set up, the sensor has a button to hold down and it will sync to the monitor. The 510 you have to manually enter the numbers for the sensors.
|
|
|
|
|
|
|
