 |
 |
 |
|
With the Blue Ox BXW0550 SwayPro, you will never have to buy another hitch again, even if you get a new trailer. The spring bars are the only thing that you will ever need to change if you upgrade to a heavier or lighter trailer. Also, the days of a squealing, creaking hitch are behind you as the SwayPro is quiet and does not need to be removed to back up.
- Quick and easy to install: 15 to 20 minutes.
- Open design for easy removal of the hitch ball.
- Easy hook up and disconnect.
- Powder-coated steel finish prolongs the life of the product.
- Spring bars automatically lock into place. Simply turn 90° to remove.
- Sway Control is controlled by the Signature Series Rotating Latches and Spring Bar Attachment.
- Weight distribution is built into the hitch head. No fine-tuning or adjustments are necessary.
- Rotating latches enable you to hook up much quicker and with less hassle than traditional snap-up methods.
- Install hitch head at the proper height and you’re done.
- No serrated washers, no cams, and no shim packs to fuss with.
- Includes head assembly, 7 hole, 9" shank, spring bars, lift chains, and rotating lift brackets with handles.
- Note: Hitch ball is not included. Hitch Ball can have a 1" or 1-1/4" shank with a maximum length of 2-7/8"
- Use with trailers that have a tongue weight up to 350 lbs and a gross towing weight of 3,500 lbs.
- Fits 2" receivers.
- Hitch Head Features:
- Pre-adjusted hitch head, no fine-tuning necessary.
- Sway prevention.
- Spring Bars Features:
- Spring steel construction for a softer, smoother ride.
- No noise.
- No grease on the spring bars means no grease on your clothes.
- The flex also provides optimal weight distribution and improves ground clearance.
- Latch Features:
- Easier to latch.
- Back up without disconnecting.
- More clearance for enclosed trailer frames.
- Weight: 83 lbs.
- Limited Lifetime Manufacturer Warranty.
Blue Ox SwayPro Weight Distribution Hitch With Sway Control - 350 Lbs Tongue Weight
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
The SwayPro delivers four points of sway control. Within the hitch head, the trunnions are designed to hold the spring bars in position, placing tension on each one to force your trailer in line. The Swaypro's rotating brackets ensure that the lift chains are pulled tight keeping tension on the spring bars and keeping them inline. As your trailer begins to sway tension is applied to the opposite spring bar forcing the trailer back into alignment with the tow vehicle. The Blue Ox SwayPro unlike other friction sway control hitches, allows you to back up your trailer without having to remove or disengage the system.
Revolutionary Signature Series Rotating Latches:
- A handy latch tool provides leverage and the easy wind-up action makes latching the chains easy and secure. Plus the latch cannot be overloaded and you can back up without removing the hitch. Rotating latches eliminate noise during turning and backing. Wrap-around chain design secures chains so they don’t make noise. Low profile latch bracket design is compatible with most A-frame accessories. Does not interfere with most battery compartments, LP bottles or enclosed trailer frames.
- The signature Series rotating latches enable you to hook up much quicker and with less hassle than traditional snap-up methods, and will improve the amount of clearance for enclosed trailer frames, propane bottles and battery compartments, all while allowing you to back up without disconnecting. Signature Series latches prevent sway at the source.
|
|
|
|
|
|
|
