![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
Additional Product Information
Note: The tee fitting must be installed between the vapor withdrawal valve on your LP-Gas container and the pressure regulator. This properly places the tee fitting in the high pressure portion of the LP-Gas system. Gas connections to the tee fitting are not designed for movement or rotation after installation. Flexing, twisting, or vibration should be avoided. Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing flow of the valve or if the excess flow valve installed exceeds the fl ow capacity of the system.
|
|
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif)
|