 |
 |
 |
|
The Solera 362237 Awnbrella adds support to your RV awning and provides better angling to allow for improved water or debris runoff while your awning is extended.
- Fits most 8 ft standard projected awnings with a width of 14-18 ft.
- Rust-resistant aluminum bows hold your awning fabric tight and arched to allow better water and debris runoff.
- Your awning fabric should be in good condition when using the Awnbrella, or it could rip.
- For proper water drainage, the roller tube must be at least 6" lower than the hanger rail on your RV.
- Warning: Do not leave your awning open in strong winds.
- Provides better clearance above your RV door.
- Great for weekend getaways or RV owners that keep their awning open for extended periods of time.
- Awnbrella arms need to be evenly spaced, with no more than 54" between each arm.
- Velcro stabilizers are included as a safety precaution to secure the Awnbrella and prevent the arms from shifting or falling.
- Requires the following tools for installation: cordless or electric drill or screw gun, 7/16" metal drill bit, Phillips head screwdriver, 1/4" fine round file, punch, ladder, and measuring tape.
- Individual Bow Dimensions: 57" outer arm length x 30" inner arm length.
- Weight: 14 lbs.
- Includes (3) adjustable arms, (6) velcro pads with adhesive backing, (3) hanger blocks, (6) plastic tightening knobs, and (6) 1-1/4" self-tapping mounting screws.
- Limited 1-Year Manufacturer Warranty.
- Made in the USA.
Solera Awnbrella Awning Support Kit - 8 Ft - 3 Bows
|
|
|
 |
|
 |
|
