• Comes pre-charged at 30 PSI and has a maximum operating pressure of 125 PSI (25 bar).
  • Do not exceed 40 PSI for long-term storage or when not in use.
• Pre-charge is recommended to be checked once every season.
  • A standard tire pressure gauge may be used to check the pressure.
• This unit may be installed anywhere in the pressurized side of your plumbing.
• Mountable in any position.
  • For winterizing or sanitizing, it is recommended to mount with the pre-charge valve stem facing up.
• Do not allow to freeze or mount near a high heat source.
• Torque threaded fittings to 1/2 to 1 turn (never exceed 6 ft/lbs on the ports).
• Plumb your system using high pressure (2x pump rating), braided, flexible tubing to minimize vibration and noise.
• Provides additional water storage to assist the pump in meeting the total demands of the system.
• Extends pressure switch-controlled pump life by reducing pump on-off pulsation.
• Note: not recommended for use with a 4900 or 5900 series Smart Sensor pump.
• Total Volume: 21 oz.
• Port Size: 1/2" NPSM-Male
• Mounting Bracket: (2) 7/32" holes at 4-1/16" centerline apart.
• Dimensions: 8-3/4" L x 3-3/4" diameter.
• Weight: 1.5 lbs.
• Limited 1-Year Manufacturer Warranty.

Shurflo Fresh Water Accumulator Tank