 |
 |
 |
|
The Sea Foam Motor Treatment is a fuel system cleaner formulated to work on gas and diesel engines. Helps clean fuel injectors, carburetors, intake valves, and chamber deposits, lubricates cylinders, and stabilizes gas and diesel fuel for up to 2 years.
- Works with any gas or diesel fuel brand, and any motor oil, conventional or synthetic.
- Formulated for use in cars, trucks, boats, tractors, and small engines.
- For 2-cycle and 4-cycle engines.
- Works in crankcase oil to liquefy any residue or deposits.
- Simple to use, just pour it in!
- Controls moisture in fuels.
- Quiets noisy lifters.
- Adds lubricity to fuel.
- Helps stored fuel resist evaporating, preserves ignition vapors, and stops gum and varnish from forming.
- Contains only petroleum-based ingredients that will not harm your engine or fuel system.
- Reduces hesitation and rough idling.
- How much to use:
- In Fuel:
- Regular maintenance: 1 oz of Sea Foam per 1 gallon of fuel.
- For cleaning: use 2+ oz per gallon.
- In Oil:
- 1 oz per every quart of oil in your crankcase.
- Simply remove your oil filler cap and pour Sea Foam right in.
- For Storage:
- 1 oz per gallon of fuel.
- After the fuel has been stabilized, run your engine so that treated fuel can make its way through fuel injectors and carburetors.
- How often:
- In Fuel:
- Cars and trucks: 1-2 cans of Sea Foam every 3,000 miles.
- Engine equipment: 1 oz of Sea Foam per gallon to a fresh tank fill, every 3 months or sooner.
- All other engines and fuel tanks: Add Sea Foam to every tank of fuel.
- In Oil:
- Sea Foam can be used any time during the oil interval.
- Adding Sea Foam 100-300 miles before your next oil change is recommended.
- For Storage:
- Add to every tank of stored fuel.
- Best used when the fuel is fresh.
- EPA registered.
- Sold as a 20 oz bottle.
- Weight: 1.5 lbs.
Sea Foam Motor Treatment - 20 Oz
|
|
|
 |
|
 |
|
