Exclusive Programmable Gauge System
The ScanGaugeII features the exclusive X-GAUGE™ programmable gauge system; you can monitor parameters such as transmission temperatures†, trip data and fuel economy information. X-Gauge™ gives you the ability to customize your ScanGaugeII by adding additional vehicle specific digital gauges.
All New Performance Monitor
The ScanGaugeII features the all new Performance Monitor™ for real-time performance measurements. The Performance Monitor gives your the ability to track your vehicles performance over short periods of time, distance and acceleration.
Learn to Improve Your Gas Mileage
The US government has put out a report that says driving habits can change fuel-economyy up to 33%. ScanGaugeII provides real-time data about your vehicle’s instant and average fuel economy, fuel used, cost of fuel used for each trip, cost per mile, gallons per hour and more!
Trouble-shoot Your Vehicle
ScanGaugeII can help you diagnose and trouble-shoot problems by providing real-time data about your vehicle’s performance. In addition, ScanGaugeII will display captured trouble codes and conditions when the problem occurred. With the ScanGaugeII you can “pull the codes”, make your own repairs and turn off warning lamps just like the Pros.
Catch Problems Early
ScanGaugeII provides real-time gauges to show you what is going on “under the hood” so you can catch issues early before they become more expensive problems.
Turn off That Check Engine Light!
The ScanGaugeII can check for Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.
Clear Trouble Codes
Data captured when the Trouble Code was set can be recalled to help troubleshoot the problems (was the temperature hot or cold, speed high or low, etc.). The ScanGauge II can be used to clear the trouble codes and data which will turn off the warning lamp.
Is Your Vehicle Ready for Emissions Testing?
Some states now require that vehicle self tests have been completed since the codes were last cleared, before running emissions checks. The ScanGauge reports this “Readiness”.
Read & Clear Pending Trouble Codes
If no codes where found and your Check Engine light is still on, your vehicle may be storing pending codes. ScanGauge provides a method to force clear any detected or undetected Trouble Codes.
ScanGaugeII - Scantool Overview - ScanGaugeII allows you to scan for and clear trouble codes
