 |
This FatMat R25 RattleTrap Super Stick Sound Deadener is a 25 sq. ft. roll and is not like any other RV sound deadener around. The patented super seal formula will adhere to nearly any type of surface on your RV. Not only will it stick, it will stay there once installed for the life of your vehicle. The seal is an aggressive coating that no other Sound Deadening company has but FatMat! The Rattle Trap Super Stick also has the ability to be applied in any weather condition, cold or hot and there is no heating required, making this a simple installation.
- Can be installed in extreme conditions and requires no heating.
- Forms & bonds to virtually anything.
- Coated super stick formula.
- Gain unbelievable sound quality.
- Rattling, vibration & noise control.
- Practically eliminates road noise, loud exhaust and engine noise.
- Leaves no odor.
- May be placed under the hood.
- Ability to be painted.
- Patented rubberized compound.
- Polished aluminum shield.
- Stays flexible.
- Easy installation.
- Great for firewalls, floors, doors, trunks, side panels, roofs and more...
- Keeps Heat In-Cold Out in the Winter, Keeps Cold in-Heat Out in the Summer.
- 80 mil nominal thickness.
- 25 Sq Ft roll.
- Dimensions: 5 Sheets 18" W X 40" L.
- Comes with a no questions asked manufacturers lifetime warranty & 100% satisfaction guarantee.
Included: 25 Sq Ft Rattle Trap, Xtreme
Roller For Easy Installation, Handy Cutting Knife, FatMat Decal and Installation Instructions.
Used for: The RattleTrap can be used in many different places including your RV, Trailer or camper. Use this to deaden sound from the floor of your RV, while traveling you will barely here the sound from traveling down the freeway. Have a loud exhaust this can help or use this to make the sound of the bass from your stereo, more enjoyable.
What is it made of? Foil Damper (FFD) is a light weight composite consisting of a viscoelastic damping compound on an aluminum foil which is bonded onto substrates that are vibrating close to their natural frequency. This constrained layer damping composite offers very high damping over a broad temperature range while adding minimal weight to the existing structure. Rattle Trap Super Stick has a PSA (Pressure Sensitive Adhesive), shiny protective aluminum top and Peel and release paper with a super sticky coating making it ideal for automotive and many other applications.
FatMat RattleTrap Super Stick Sound Deadener - 25 SqFt
Installing Rattle Trap | | Step 1: |
| Wipe off the surface that you will be applying the FatMat Rattle Trap to with a cleaner that will not leave a residue. Be sure to get off all dirt and grease so that your FatMat bonds tightly. This step will make a big difference in how permanent your application of FatMat is. Be sure that surface is completely dry before applying FatMat
| | Step 2: | If necessary cut your FatMat to the needed size and shape with a utility knife then remove the backing from your FatMat and apply to the surface that you have just cleaned.
| | Step 3: | Make sure that you use the roller provided, this will ensure a tight bond between the FatMat and the surface. (Your fingers cannot do the job properly!!!). By using the roller you will be able to get the FatMat to stick securely to the different contours. You may find it necessary to cut the FatMat during application so that it lays flat on the surface. It is best to not leave any air between the surface and the FatMat.
|
|
|
|
