Remco's 2.2 GPM sprayer Pump with 3/8" FNPT inlet & outlet ports is the highest performing 12 Volt Sprayer pump on the market. With a pressure setting of 60 PSI, the 3300 series Sprayer Pump can withstand the demands of any agricultural spray application.

Applications:
- Agricultural/Industrial Chemical Spraying
- Liquid Fertilizers
- Soft Washing/Beaching
- Dust Suppression
- General Industrial
Designed to with stand long duty cycles.
- Up to a motor temperature of 180 degrees
Compatible with most common agricultural chemicals including
- herbicides
- fertilizers
- insecticides
- This pump is not listed for potable water use.
- NOT FOR USE WITH GASOLENE OR ANY PETROLEM PRODUCTS
Motor:
- 12 VDC Permanent Magnet, Sealed Intermittent Duty
- Voltage Range: 11.5 VDC – 14.5 VDC
- Max Amps: 8 Amps at 60 PSI
- Fuse: 10 Amp Recommended
- Control: Pressure switch
- Maximum Shell Temperature of 180 F
- Wire Leads: 14 AWG - 6" in length
- IP Rating: IP65
Pump:

3 Chamber Diaphragm
Maximum Flow: 2.2 GPM
Inlet/Outlet Ports: 3/8" FNPT ports.
Max Liquid Temp: 140 F
Vertical Prime: up to 8 feet
Run Dry: Yes
Pressure Setting: 60 PSI [3.8 Bar]

Dimensions: 8.7" length x 3.6" width x 3.4" height
Weight: 5.6 lbs.
OEM P/N: 3323-1E1-82B.
Made in the USA.
3300 series installation manual

Remco Professional Grade 3300 Series 2.2 GPM, 60 PSI on Demand 12V Sprayer Pump, 3/8" FNPT Ports