The Purple Line EM4445 Enduro Trailer Mover With Remote allows users to park their trailers by remote control into any position required. Works on most surfaces in most conditions. Control when going up or downhill, control when hitching, control when unhitching. Supplied with complete fitting kit including all cables, clamps, p-clips, cable ties, chassis stops, convoluted cable trunking, control board and remote control. Eliminate stress and minimize the risk of damaging the trailer by parking it yourself.

Simple to use Remote Control
Powerful high torque 12V electric motor, a control unit and remote handset. This kit includes (2) movers and all necessary hardware for single axle trailer. Note you will need to buy (2) kits for tandem axle trailers. Kits can be linked to work off of (1) remote.
Constructed of high quality steel components for durability & reliability.
Compact drive gearbox that produces more power while at the same time, drawing a smaller current.
Trailer mover is equipped with lightweight, solid cast alloy rollers that contact the tires to move the trailer.
Channel cut roller design uses an over cam engagement that locks into place & delivers enough force to turn the trailer's wheels.
Cross actuation feature engages both rollers simultaneously from either side of the trailer.
Trailer mover is water resistant and to an extent, waterproof, however it shouldn't be operated when submerged.
Wireless remote control handset offers 360 degrees of strong signal.
Metal components are corrosive resistant with electro plated & powder coated finishes to enhance the life of the product as well as the durability of the product.
Isolation switch is fitted to prevent accidental use of the remote, ensuring you that little curious fingers won't compromise anyone's safety.
Control unit & handset will shut down automatically after 60 seconds of sitting idle.
Control unit will automatically shut down if the mover is continuously working in one direction for 3 minutes.
Built in motor overload protection for both current and temperature, meaning that a fuse is not required.
Trailer mover automatically brakes as soon as the handset button is released.
The ideal location for the Enduro is in front of the axle, but can be fitted behind the axle if needed.
The Enduro Trailer Mover will fit most trailers
The ground clearance from the bottom of the chassis must be a minimum of 6.5"
The clearance from the tire to any object must be at least 16"
Safe working load: 5,000 lbs on flat terrain (2 motors) - up to 3300 lbs on a 25% incline.
- 6,800 lbs on flat terrain (4 motors) - up to 5500 lbs on a 20% incline.
Compatibility:
- single axle trailers (2 motors) up to 5,000 pounds,
- tandem axle trailers (4 motors) up to 7,800 lbs. (Please note: tandem axle trailer requires (2) Enduro Power Trailer Mover kit, & both kits can be synchronized to the one handset.)
1-Year Parts Manufacturer Warranty.
Entire unit is transferable to a new or upgraded Trailer

Included: All necessary installation hardware, (2) Enduro movers (2) chassis adapter plates (Adapter must be attached to the chassis and the Enduro, then clamps onto the plate.), (1) wireless remote control, operator instructions, & user manual. Note: When installing the Enduro Trailer Mover, entry steps & waste water outlets may need to be re-positioned.
Specification

Weight: 88.2 lbs max
Dimensions: 57" long x 17-1/2" wide x 15-1/2" high
Operating Voltage: 12 Volt DC
Minimum current consumption: 19 Amps
Maximum current consumption: 84 Amps
Minimum Width (trailer): 70.5"
Maximum Width (trailer): 94.5"
Power output: 1000 ft lbs
Speed: .24 mph
Dim. Wt. 99 lbs.

Purple Line Enduro Trailer Mover With Remote