 |
The Garnet 709-2P SeeLevel Tank Monitoring System is designed for accurate level measurement of motorhomes and trailers with two holding tanks. This system monitors battery voltage, fresh and black water levels. The level in percent is shown on a three digit LED display.
- Monitors battery voltage, fresh water tank and black water tank
- Includes Fresh Water Pump Switch
- Provides accurate tank level information using percentage of full readout
- Tanks are monitored using Garnet’s proprietary external level sensing technology
- This ends fouling problems caused by debris build-up in the holding tank
- Detailed diagnostic information monitors sender operation
- Measures tanks from 3.5" to 34" depending on the sensors you specify.
- 710-AR Sender (standard) 3.5" min to 10.5" max (stacked = 21")
- 710-ES2 Sender (optional) 5.5" min to 14" max (stacked = 25")
- 710-SS Sender (optional) 7" min to 14" max (stacked = 34")
- Tank senders connect to the display via a common bus network
- All senders can be connected to the same wire
- Display uses easy to connect connector system
- Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
- Current drain is less than 200mA
- Panel Dimensions: 4" W x 2.8" H x 1" D
- Required Cutout Size: 3" W x 1.8" H
- Includes:
- (1) Display monitor.
- (1) pigtail
- (4) mounting screws.
- (2) 9″ 710-AR standard tank senders
- NOTE: If you have taller tank(s) and require a 12" Sender = 710-ES or 16" Sender 710-SS specify in the checkout order notes along with quantity of each.
- Senders will not work on metal tanks.
- Limited 1 year manufacturer warranty
- See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.
Garnet 709-2P SeeLevel RV Tank Monitoring System
Seelevel 709-2 Tank Monitoring System
Seelevel Sensor Installation
|
|
|
