 |
 |
 |
|
The Fenwal 120 VAC Direct Spark Ignition Control Module is designed for heating equipment that runs on 120 VAC power and ignites LP or natural gas. Microprocessor circuitry is designed to provide precise, repeatable timing sequences for ignition, purge, as well as multiple attempts at igniting and sensing flames during the pre-purge phase.
- Ideal for various applications including commercial cooking equipment, ceramic infrared heaters, construction heaters, or any 120 VAC gas burner application under 400K BTU.
- Can be mounted one of two ways:
- Open board with stand-offs - for saving space and cost.
- Potted - protection for washdown and vibrations.
- Multi-pin connector for quick assembly.
- 2 trial ignition options: 1 and 3 try.
- 4 trial ignition times: 4, 7, 10, and 15 seconds.
- 2 flame sense options: single spark and sense and remote sense.
- Input Power: 102 to 138 VAC, 50/60 Hz
- Input Current Drain: 50mA @ 120 VAC, 60 Hz
- Gas Valve Rating: 1.5A @ 120 VAC
- Operating Temperature: -40 to +175 deg. F, -40 to +80 deg. C
- Flame Sense Voltage: 45% of line voltage
- Flame Sense Current: 1.0 microamp minimum
- Flame Failure Response Time: 0.8 seconds maximum
- Type of Gases: Natural, LP and manufactured
- Spark Rate: Line frequency (50/60 Hz)
- Weight: 2 lbs.
- Also known as NBK Parts 20388.
Fenwal Direct Spark Ignition Control Module, 120 VAC
|
|
|
 |
|
 |
|
