Home > RV Accessories > Bathroom >

Oxygenics PowerFlow Hand Held Shower Head
Oxygenics 87964 PowerFlow Hand Held Shower Head
Oxygenics PowerFlow Hand Held Shower Head
 
Alternative Views:


Price: $54.00
MFG P/N: 87964
MFG: Oxygenics
UPC #: 010147879643
SHIPS: In 1 Business Day

Quantity in Stock :25

Availability: In Stock
Qty:

Description
 
The Oxygenics PowerFlow Shower Head is WaterSense certified, which means you do not have to worry about compliance with water regulations. The PSI measures the water pressure, while the GPM measures the washer's flow rate.
  • Installation takes only a few minutes with no special tools required
  • With 5 spray settings, the mobile shower makes a great addition to the comfort of your home on wheels
  • The shower head features a Flow Control lever that lets you reduce water flow to a trickle (perfect for shaving/lathering!)
  • This product features a newly developed strobe setting which is very relaxing after a long day on the road
  • The stream output is optimized according to your tank size and water pressure
  • Nonstick internal components prevent mineral deposits from building up so you can remain confident in your showering experience
  • Using your finger you can clean the supple rubber nozzles clean
  • Does include; Wall Mount, Plumbers Tape, Shut Off Valve, and Hose
  • Shower Type: Hand Held
  • Flow Rate: 1.8 Gallons per Minute
  • Finish Type: Oil Rubbed
  • Coloring: Bronze
  • Shape: Round
  • Diameter: 3.75 Inches
  • Length: 9.33 Inches
  • Limited lifetime manufacturer's warranty
Oxygenics PowerFlow Hand Held Shower Head
Additional Product Information
Installation Instructions:
Step One:
Remove your existing shower head. To remove, simply unscrew the shower hose from the faucet by turning the hose end counterclockwise.
Step Two: Remove any remnants of old plumbers tape
Step Three: (Optional) Wrap plumbers tape clockwise 2 or 3 turns around threaded end of faucet mount
Step Four: In a clockwise direction, screw end of hose to the taped portion of the faucet. Hand tighten only.
Step Five: Attach other end of hose to base of handheld and hand tighten
Step Six: Attach double stick tape provided to back of holder and press firmly to clean, dry shower wall. Place your new handheld shower head into holder.

Attention:
Washers must be inserted into both hose ends for proper installation.