Home > Fresh Water > De-Ionizing Systems >

On The Go Spotless Portable Dual Bed Water Deionizer

Alternative Views:

Price: $422.40

MFG P/N: OTG2-DDI
MFG: On The Go

Quantity in Stock :7

Availability: In Stock

Qty:

Description

Overview

The On The Go OTG2-DDI Dual Bed Standard Deionizer offers significant savings and more purified water, producing 505 gallons at 250 PPM and allowing you to rinse 15-38 RVs before resin replacement. Its dual bed system provides 2.5 times the water and reduces operating costs by 50%, ensuring spot-free rinses for your vehicle.

Features

TDS meter lets you know when to replace the deionizer.
Easy and fast hook-up.
No need to dry after washing.
Approx. 15 to 38 rinses for a 36' Class A RV.
Provides up to 1260 gallons of DI water.
Replacing resin is simple and easy.
Design: duel bed system.
Includes a polypropylene cam lever for easy hook up, a high-flow shut-off valve, 4 ft hose, carrying handle, cap and plug for travel plus an easy-to-read handheld TDS meter.
Deionizer refill available separately, see part OTG2-DDI-REF-1

Specifications

Size: 22" height, 6 3/4" diameter each tank.
Capacity: 0.25 cubic feet.
Flow rate: less than 2 gallons/minute for best performance.
Weight: 18 lbs. each.
1 year limited manufacturer warranty.
Made in the USA.

Instructions

See additional info section below.

On The Go Spotless Portable Dual Bed Water Deionizer

Additional Product Information

INSTALLATION:

Connect water source to the inlet of the deionizer (if you have the Dual/Tri Bed DI's connect the units together with the cam lever coupler)
Make sure deionizer is standing upright for use
Flush out system for 2-3 minutes (This gets out all the resin dust. It might need to be flushed out longer depending on unit size and flow rate. Check the TDS before use.)
Connect outlet to point of use
Your new unit is ready for use

REFILLING:

Step A: When output water quality has exceeded predetermined level, or when spotting occurs, DI water is no longer being produced. Shut off the water supply and remove tank head.

Step B: Empty resin into a waste container and rinse out tank. Dispose in accordance with federal, state, and local regulations.

Step C: Return distributor tube into the tank and place the blue cap over top of tube. Place funnel into top of the tank.

Step D: Slowly pour or scoop resin into the tank. Shake or tap tank to get all of the resin bedded. Tank should be filled to approximately three inches from the top.

Step E: Remove the funnel and blue cap. Replace tank head. Make sure all O-rings are properly seated. Insure seating areas are free from foreign material; apply silicone lubricant to surface of O-rings.

Step F: Connect the water source to the inlet of the deionizer. Turn on water and flush out the system for 2-3 minutes (gets out all the resin dust). The unit will now produce deionized water.