The Intellitec Monoplex 10 Amp Water Pump Controller is designed to operate as a "low side" remote switch in 12 Volt DC systems. Whilst the water pump controller was designed to control the domestic water pump in an RV or boat application, its use however is not limited to this, it could also be used to control a wide variety of loads such as lighting, other pumps, fans etc. when it is convenient to switch on the ground side.
- Minimizes the use of heavy gauge wire that runs throughout the coach
- Signaling from multiple points along the single wire can be easily accomplished with inexpensive switches, providing momentary contact to ground
- Simplified switches (momentary buttons) increase reliability
- Power to the water pump controller can be supplied from either the battery or the converter
- Negligible standby current makes this system superior to conventional multi-point relay switching
- Labor and initial installation costs are reduced compared to multi-point switching using conventional switching
- Packaged in a plastic enclosure for mounting near the water pump using two flat head screws
- Color: black
- Weight: 0.2 lbs
- Voltage Rating: 10 to 16 Volts
- Ampere Rating: 10 Amps
- Limited 90-day warranty
Intellitec Monoplex 10 Amp Water Pump Controller
