|
|
|
|
The ESCO Relay Base Automatic Transfer Switch is capable of handling 100 Amps of shore line/utility power and a 24 kilowatt generator. This automatic power transfer switch can automatically sense when generator power is connected and will prevent two power sources from entering the AC distribution panel at the same time. A time delay circuit board, ensures the generator voltage is at its proper operation level before power transfer occurs and can be switched off for instant power switching. In the case of a failure, the quick change circuit board allows you to simply replace the failed circuit board with a new one in just seconds. Designed with DC coiled relays that reduce electrical hum, heavy duty terminal blocks that make wiring and installation easy. For use as an electrical transfer switch to automatically switch multiple power sources from one to another. (3) General purpose DPDT 50 Amp Relays, 110 VDC 2 Watt Coil and 120 - 240 VAC, 100 Amps Per Pole. Model: LPT100. ETL Listed, UL & CSA Approved. Dimensions: 12" L x 10" W x 4" D. Comes with a 1 year manufacturer warranty.
Esco LYGHT RV 100A Relay Base Automatic Transfer Switch
- Heavy Duty Relay Assembly Will Handle 100 Amps Of Shoreline/Utility Power And Up To A 24KW Generator
- Utilizes An Auxiliary Switch On The Neutral Relay To Ensure That The Neutral Lines Are Engaged Before The Hot Lines
- Automatically Switches From The Power Cord To The Generator
- Designed With DC Coiled Relays To Reduce Electrical Hum
- Quick And Easy Installation
- OEM Or Aftermarket Application's
- Transfers Two Hot Poles And Neutral Simultaneously
- Approved For Use In RV And Residential Applications
- ETL Listed
- UL & CSA Approved
- 1 Year Manufacturer Warranty
ESCO 100A Relay Base Automatic Transfer Switch
LYGHT 100A Transfer Switch - Contactors: (3) General purpose DPDT 50 Amp Relays
- Coil: 110 VDC 2 Watt Coil
- Knockouts: Assorted
- 120 - 240 VAC
- 100 Amps Per Pole
- Dimensions: 12" L x 10" W x 4" H
- ETL Listed
- UL & CSA Approved
- 1 Year manufacturer warranty
**Cautions: - Install vertically or horizontally in a clean, dry accessible area.
- Consult manufacturer before drilling into the metal case.
- Keep covered at all times, except during wiring as relays are sensitive to dust and debris.
- HI-Point with LPT100 disconnected or HI-Point on load side of switch
|
|
|
|
|
|
|