 |
The K-Source VS55010 Lane Change Alert Cam Towing Mirrors capture motorcycles, other vehicles and pedestrians approaching your blind spots when your turn signal is activated. A graphic symbol lights up in the mirror lens and gives the driver a visual warning with an audible beep, when there is an object beyond the range of the tow mirror. It also includes a turn signal arrow on the mirror for added safety. Check vehicle fitment below.
- Improves driving safety
- Red LED flash frequency
- Made of ABS plastic for durability
- Heated power
- Manually extendable for towing
- Can fold away for convenient stowing
- Waterproof material ensuring a long lasting product
- Power:
- Operating voltage: 9-16 volt (ACC In)
- Consumption current: 0 amp (ACC off), 360mA-420mA (turn on, stand by) (without camera), 410mA-550mA (turn on, the system works, LED and beeper works) (without camera)
- DSP:
- Speed of DSP: 800MHz
- Image calculated speed: 10 mph
- Effective area (both sides): 9 3/4' x 26 1/4' area, 17' height (with camera installed on the door mirror, height of camera is about 3 1/4' height)
- Input: Turn signal for both left and right hand sides
- Warning activation: When object is in area during driving preventing accidents
- LED:
- Red LED flash frequency: 1 Hz
- Brightness: 450 mcd
- Angle: 110 degrees
- Consumption current: 50mA (max.)
- Beeper:
- Normal voltage: 11 VDC
- Consumption current: 10mA (max.)
- Operating voltage: 6-13 VDC
- Operating frequency: 1.1 Hz
- Camera:
- Image sensor: 1/4" Color CCIQ II
- Video systems: NTSC
- Pixels: 648 x 488
- Resolution: 320+-10 TV lines
- Minimum illuminator: 1 Lux
- Image transfer rate: 20 mph
- Video output: 1 Vp, 75 ohms
- Power supply: 9-16 volts
- Power current: 30 mA
- Dimensions: 0.73" x 0.73" x 1.06"
- Set of 2 mirrors. (right and left)
- Limited 90-day manufacturer warranty
K-Source Lane Change Alert Cam Towing Mirrors
|
|
|
