 |
 |
 |
|
The Garnet 709-HP3W SeeLevel II Tank Monitoring System is designed for accurate level measurement of motorhomes and trailer holding tanks. This system monitors battery voltage, three holding tanks, fresh, grey, and black water levels as well as the LPG tank. The level in percent is shown on a three digit LED display. This model includes a 3-way pump switch and a single-pole water heater switch on the display panel.
- Monitors battery voltage, fresh water tank, grey water tank, black water tank and LPG tanks
- Includes Fresh Water Pump Switch
- Includes Hot Water Tank Switch
- Provides accurate tank level information using percentage of full readout
- Tanks are monitored using Garnet’s proprietary external level sensing technology
- This ends fouling problems caused by debris build-up in the holding tank
- Detailed diagnostic information monitors sender operation
- Measures tanks from 5" up to 34" depending on the sensors you specify
- Tank senders connect to display via a common bus network topology which saves wiring costs
- LPG tank connection compatible with existing electric senders
- Calibrate LPG at first fill of tank or it can be factory calibrated
- Uses common industry connector for ease of installation and servicing
- Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
- Current drain is less than 200mA
- Panel Dimensions: 4" W x 2.8" H x 1" D
- Required Cutout Size: 3" W x 1.8" H
- Includes: (1) Display monitor, (3) 9″ 710-AR tank senders, (1) pigtail and mounting screws
- Limited 1 year manufacturer warranty
- See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.
Garnet 709-HP3W SeeLevel II Tank Monitoring System
Seelevel 709-HP3W Tank Monitoring System
Seelevel Sensor Installation
|
|
|
 |
|
 |
|
