The Garnet 709-4PH SeeLevel II Tank Monitoring System is designed for accurate level measurement of 5th wheel trailers with four holding tanks. This system monitors battery voltage, fresh, grey, galley and black water levels. The level in percent is shown on a three digit LED display. This model includes a single-pole pump switch, a single-pole heater switch and a heater pilot out light on the display panel.
- Monitors battery voltage, fresh water tank, grey water tank, black water tank and galley tank
- Provides accurate tank level information using percentage of full readout
- Tanks are monitored using Garnet’s proprietary external level sensing technology
- This ends fouling problems caused by debris build-up in the holding tank
- Detailed diagnostic information monitors sender operation
- Measures tanks from 5" up to 34" depending on the sensors you specify
- Grey and galley water tanks are limited to 12" Tall
- Tank senders connect to display via a common bus network topology which saves wiring costs
- LPG tank connection compatible with existing electric senders
- Calibrate LPG at first fill of tank or it can be factory calibrated
- Uses common industry connector for ease of installation and servicing
- Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
- Current drain is less than 200mA
- Panel Dimensions: 4" W x 2.8" H x 1" D
- Required Cutout Size: 3" W x 1.8" H
- Includes: (1) Display monitor, (4) 12″ 710ES tank senders, (1) pigtail and mounting screws
- Limited 1 year manufacturer warranty
- SeeLevel II RV Tank Monitor Comparison Guide
NOTE: This system will not work on metal tanks.
NOTE: The standard
12″ 710ES senders may be swapped out for either the
6” 710JS and/or
16” 710SS senders. (If you need to exchange senders, please call 866-332-7881 to place your order. Additional charges may apply.)
Garnet 709-4PH Seelevel II Tank Monitoring System
