 |
 |
 |
|
The Garnet 709-N2K-NLP SeeLevel II Tank Monitoring System is designed for accurate level measurement of motorhomes and trailers with three holding tanks. This system monitors battery voltage, fresh, grey, and black water levels. The level in percent is shown on a three-digit LED display. This model includes a 3-way pump switch with a connector which allows for more wiring options.- Monitors battery voltage, fresh water tank, grey water tank, black water tank
- NMEA 2000 network compatible, tank levels and capacity are available on the NMEA bus for fresh, gray, and black tanks.
- Regularly scans senders every 10-15 seconds to keep tank level and alarm information on the NMEA 2000 bus current.
- Also Provides accurate tank level information using a percentage of full readout
- Tanks are monitored using Garnet’s proprietary external level sensing technology
- This ends fouling problems caused by debris build-up in the holding tank
- Detailed diagnostic information monitors sender operation
- Measures tanks from 5" up to 34" depending on the sensors you specify
- Tank senders connect to display via a common bus network topology which saves wiring costs
- Uses common industry connector for ease of installation and servicing
- The display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
- The current drain is less than 200mA
- Panel Dimensions: 4" W x 2.8" H x 1" D
- Required Cutout Size: 3" W x 1.8" H
- Includes: (1) Display monitor, (3) 9″ 710-AR tank senders, (1) pigtail and mounting screws
- Limited 1-year manufacturer warranty
- See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.
Garnet 709-N2K-NLP SeeLevel II Tank Monitoring System
Seelevel 709-N2K-NLP Tank Monitoring System
Seelevel Sensor Installation
|
|
|
 |
|
 |
|
