 |
 |
 |
|
Overview
The Garnet 709-BTP7 SeeLevel II RV Tank Monitoring System with Bluetooth is one of our new models that includes Bluetooth® wireless technology. Designed for accurate level measurement of RVs, motorhomes, and trailers with three holding tanks. This system monitors battery voltage, fresh, grey, and black water levels as well as the LPG tank. The level in percent is shown on a three-digit LED display. This model includes a 3-way pump switch with a connector that allows for more wiring options.
Features
- Monitors battery voltage, freshwater tank, grey water tank, and black water tanks
- LPG tank connection compatible with existing electric senders
- Includes Fresh Water Pump Switch
- Bluetooth Enabled
- Bluetooth technology will allow you to read tank levels from a smartphone or tablet up to 30 ft. (9 meters) away.
- App is available for any compatible Android and Apple iOS device.
- System Requirements:
- Android: An Android phone or tablet with Bluetooth® 4.1 running Android version 5.0 (Lollipop) or newer.
- Apple iOS: An Apple iPhone, iPad or iPod touch running iOS version 11.3 or later.
- Download the Garnet SeeLevel app in Google Play Store or Apple App Store
- See manual for full instructions.
- Provides percentage of full, accurate tank measurement readouts.
- These readouts are accurate within 3/8 of an inch.
- Tanks are monitored using Garnet’s proprietary external level sensing technology
- This ends fouling problems caused by debris build-up in the holding tank
- Detailed diagnostic information monitors sender operation
- Tank senders connect to the display via a common bus network
- All senders can be connected using the same wire
- Measures tanks from 3.5" to 34" depending on the sensors you specify.
- 710-AR Sender (standard) 3.5" min to 10.5" max (stacked = 21")
- 710-ES2 Sender (optional) 5.5" min to 14" max (stacked = 25")
- 710-SS Sender (optional) 7" min to 14" max (stacked = 34")
- Accessible tanks are easy to retrofit.
- LPG tank connection compatible with existing electric senders
- Calibrate LPG at first fill of tank or it can be factory calibrated.
- Uses common industry connector for ease of installation and servicing
- Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
- Accuracy: +/- 8% or better, limited by resolution and tank height and shape.
- See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.
If you already have a Garnet Seelevel II (see list of models below), you can upgrade to the Bluetooth model by just buying the BTP7 monitor only! All you will need to do is remove the pigtail and hardwire the Bluetooth monitor to your current system.
- 709-2P, 709, 709-P3, 709-P3W or 709-HP3W.
- Note: Replacing the HP3W model with the BTP7, you will lose the hot water tank switch.
Specifications
- Temperature Range: +32 °F to +140 °F (0 °C to + 60 °C).
- Current drain is less than 200mA
- Panel Dimensions: 4" W x 2.8" H x 1" D
- Required Cutout Size: 3" W x 1.8" H
- Weight: 3 lbs.
- Includes:
- (1) Display monitor.
- (1) pigtail
- (4) mounting screws.
- (3) 9″ 710-AR standard tank senders
- NOTE: If you have taller tank(s) and require a 12" Sender = 710-ES or 16" Sender 710-SS specify in the checkout order notes along with quantity of each.
- Senders will not work on metal tanks.
- Limited 1-year manufacturer warranty
Instructions
Garnet 709-BTP7 SeeLevel RV 3 Tank Monitoring System with Bluetooth
Seelevel Bluetooth Monitoring System
Seelevel Tank Sensor Installation
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Display Mounting Panel: Black panel, approximately 4" wide by 2.8" high by 1" thick (102mm wide X 71mm high X 25mm thick). Panel screws to the wall.
System Power Requirements: Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts. Current drain is less than 200mA.
Wiring: A single two-wire conductor required from the display to the senders. All the senders are wired in parallel. 12 V power and ground required for display. A separate two-wire conductor required from the display to the LPG sender.
LPG: Display will work with an LPG sender with a maximum resistance of 50 ohms to 500 ohms. Display shows increasing level as resistance increases. System must be calibrated with the LPG tank full.
Pump Switch: The pump switch is rated for a maximum of 7.5 amps. The use of a relay is required if more than 7.5 amps is needed. A 7.5 amp (max) fuse must be installed in series with the 12V power circuit to the switch!
|
|
|
|
|
|
|
