 |
The Flow-Rite Battery Watering System is a Pro-Fill universal 24V battery watering system designed for (4) 6V batteries with non-standard spacing, and no manifolds. Each kit consists of automatic shut-off valves that replace the existing vent caps which are interconnected with tubing, making the process of filling your batteries a breeze.
- Pro-Fill on-board battery watering system is the only system that has been specifically designed for golf cart applications.
- Optimizes your battery life and performance by filling each cell to the correct level every time.
- Improves safety by filling your batteries without needing to remove vent caps, avoiding acid burns, or toxic fumes.
- Once installed a quick coupling valve allows the system to be connected to a hand pump (sold separately).
- Once connected, water flows into each cell until proper levels are reached.
- Snap-on/off water connections and fast filling allow each battery to fill in under a minute.
- Winged bayonet valves allow for installation without tools and provide a visual indication of proper installation.
- Automatic shut-off prevents over or under-watering.
- Built-in de-gas chamber allows cells to expel naturally occurring hydrogen and oxygen gases, reducing risk of ignition.
- Flame arrestors prevent external spark or flame from igniting flammable cell gasses.
- Optional protective shroud protects the internal displacer from plate growth, installation, shipping, or other damage.
- Clampless polypropylene tubing is resistant to battery acid and can withstand below-freezing temperatures.
- Improves safety by filling your batteries without needing to remove vent caps, avoiding acid burns, or toxic fumes.
- See below for a complete list of all Pro-Fill battery watering kits.
- Kit includes (12) Pro Fill valves, (12) swivel T fittings, (1) 7 ft tubing, (1) quick connect coupler, (9) red end caps, and instructions.
- Weight: 2 lbs.
- Limited 3-Year Manufacturer Warranty.
- Made in the USA.
- Always use distilled or deionized water when refilling your batteries. Minerals in tap water can coat the battery plates filling pores which will no longer be in contact with the water solution.
Note: If you are installing a Pro Fill system on brand new batteries, wait at least 4 charge cycles before adding any water.
Flow-Rite Pro-Fill Universal Battery Watering System For (4) 6V Batteries, Non-Standard Spacing
|
|
|
