 |
 |
 |
|
This FatMat RattleTrap Super Stick Sound Deadener is 50 sq. ft. It has a thickness of 80 mil and is quite unlike any other sound deadener on the market. The patented super seal formula adheres to nearly anything and once installed it will be permanent for the life of your vehicle. The seal is immediately noticeable once the mat is separated from the paper release liner. It is a very aggressive coating that no other Sound Deadening company has! It has the ability to be applied nearly any type weather condition, be it hot or cold. Installation does not require heat, so it can be applied in one easy step!
- Tremendous bass gains
- Can be applied in Xtreme conditions.
- No heating required.
- Formula forms and bonds to practically any surface, providing versatility.
- Coated super stick formula.
- Boost your sound quality by stopping rattling, vibrations, & noise control.
- Stick sound deadener reduces distortion.
- Massive DB gains
- Eliminate noises from roads, load exhaust systems, & engine noises, & get a great night sleep!
- Formula leaves no odor, eliminating possible headaches caused by strong fumes.
- Easy to install, everything you need is supplied!
- You're able to paint over the sheets.
- Patented rubberized compound delivers reliability.
- Polished aluminum shield.
- Extremely flexible formula.
- Keeps heat in - Cold out in the winter, & keeps cold in - heat out in the summer! Convenient installation!
- Compatibility: Works great for firewalls, floors, doors, trunks, side panels, roofs and more! Can also be placed under the hood of your vehicle.
- Weight: 15 lbs
- Dimensions: Roll 33.5' sq ft long X 18" wide
- Thickness: 80 mil nominal thick
- Included: 50 sq ft Rattle Trap Xtreme, (1) roller for easy installation, FatMat handy cutting knife, FatMat decal, & installation instructions.
- Limited lifetime manufacturer warranty. (No hassel return policy!)
RattleTrap Super Stick Sound Deadener - 50 SqFt
Installing Rattle Trap | | Step 1: |
| Wipe off the surface that you will be applying the FatMat Rattle Trap to with a cleaner that will not leave a residue. Be sure to get off all dirt and grease so that your FatMat bonds tightly. This step will make a big difference in how permanent your application of FatMat is. Be sure that surface is completely dry before applying FatMat
| | Step 2: | If necessary cut your FatMat to the needed size and shape with a utility knife then remove the backing from your FatMat and apply to the surface that you have just cleaned.
| | Step 3: | Make sure that you use the roller provided, this will ensure a tight bond between the FatMat and the surface. (Your fingers cannot do the job properly!!!). By using the roller you will be able to get the FatMat to stick securely to the different contours. You may find it necessary to cut the FatMat during application so that it lays flat on the surface. It is best to not leave any air between the surface and the FatMat.
|
|
|
|
 |
|
 |
|
