 |
 |
 |
|
This FatMat RattleTrap Super Stick Sound Deadener is 8 sq. ft. and 80 mil thick. It is not like any other sound deadener on the market, with its patented super seal formula that adheres to nearly anything. Once installed it will stay in place for the life of your vehicle. The seal is instantly noticeable once the mat is separated from the paper release liner. It has a very aggressive coating that no other Sound Deadening company has but FatMat! Another feature of Rattle Trap Super Stick is that it can be applied no matter what the weather is, be it hot or cold. Installation can be done in one step, as it requires no heating. The Rattle Trap Super Stick remains super flexible, regardless of extremes in temperature. Includes a no questions asked manufacturers lifetime warranty & 100% satisfaction guarantee. Comes with a roller for easy installation, a handy cutting knife & installation instructions.
- 8 sqft Sheet (18" wide x 64" long)
- 80 mil nominal Thickness
- Can Be Applied In Xtreme Conditions
- No Heating Required
- Forms & Bonds To Virtually Anything
- No Hassle Return Policy
- Coated Super Stick Formula
- Gain Unbelievable Sound Quality
- Stop Rattles, Vibration & Noise Control
- Practically eliminate Road Noise, Loud Exhaust and Engine Noise
- Leaves No Odor
- Easy Installation (everything needed is supplied)
- Great For Firewalls, Floors, Doors, Trunks, Side Panels. Roofs and more......
- May Be Placed Under The Hood
- Paintable
- Patented Rubberized Compound
- Polished Aluminum Shield
- Very Flexible
- Keeps Heat In-Cold Out in the Winter, Keeps Cold in-Heat Out in the Summer! A Great Installation!
- Limited Lifetime Manufacturer Warranty
FatMat RattleTrap Super Stick Sound Deadener - 8 SqFt
Installing Rattle Trap | | Step 1: |
| Wipe off the surface that you will be applying the FatMat Rattle Trap to with a cleaner that will not leave a residue. Be sure to get off all dirt and grease so that your FatMat bonds tightly. This step will make a big difference in how permanent your application of FatMat is. Be sure that surface is completely dry before applying FatMat
| | Step 2: | If necessary cut your FatMat to the needed size and shape with a utility knife then remove the backing from your FatMat and apply to the surface that you have just cleaned.
| | Step 3: | Make sure that you use the roller provided, this will ensure a tight bond between the FatMat and the surface. (Your fingers cannot do the job properly!!!). By using the roller you will be able to get the FatMat to stick securely to the different contours. You may find it necessary to cut the FatMat during application so that it lays flat on the surface. It is best to not leave any air between the surface and the FatMat.
|
|
|
|
 |
|
 |
|
