Home > Jacks & Levelers > Tongue Jacks >

Fastway Flip Automatic 6" Jack Foot For 2 1/4" Travel Trailer Tongue Jacks
Fastway Flip 88-00-6500 Automatic 6" Jack Foot For 2 1/4" Jacks
Fastway Flip Automatic 6" Jack Foot For 2 1/4" Travel Trailer Tongue Jacks
 
Alternative Views:


Price: $42.76
MFG P/N: 88-00-6500
MFG: Fastway
UPC #: 856301002003

Quantity in Stock :5

Availability: In Stock
Qty:

Description Instructions
 
The Fastway Flip automatic jack foot gives you an automatic 6" extension that locks into place when extended, no more bending or kneeling down in the gravel gets rid of the hassle of placing blocks under your tongue jack. Bolts quickly and easily to your existing jack. The Flip puts itself away, with no springs, cables, pins, or clips required. It drops into place automatically when you extend your jack. Works great with a pop-up trailer, truck camper, fifth wheel travel trailers.
  • 6" extension giving exceptional sustainability.
    • Programmed to hold up to 3,000 lbs.
    • The tongue weight's maximum is 1,400 lbs.
  • Reachable to any jack that has measurements of 2-1/4" and 2" outside dimension of the inner jack tube
  • Attachable to:
    • Round/square jacks Manual/electric jacks
    • Automatically bolts on the bottom of your jacks inner tube
    • Programmed to fold into place for easy storing.
  • Footplate:
    • The dimensions are 6" tall x 4-1/2" wide
    • Tough and reliable constructed steel
    • Designed to wedge between the ground and the trailer, that way it can flip up smoothly to lift your trailer so you don't have to do as much work
  • Ring spacer is included for when you want to attach a jack that has a 2-1/2" outer tubing and that has the diameter of 2".
  • This jack can extend down, so that way you can safely lock your spot into place.
  • Limited 1-Year Manufacturer Warranty

Fastway Flip Automatic 6" Jack Foot For 2 1/4" Travel Trailer Tongue Jacks

Additional Product Information

Which Width?

whichwidth.jpg

The Flip jack foot come in two widths. One to fit a 2-1/4" jack, and one to fit a 2" jack. To find out what size jack you have measure the width of your jack above the trailer frame (as shown in the illustration to the right.) - A 2-1/4" Flip fits almost all standard tongue jacks (95+%). - A 2" Flip fits very small trailers and some electric tongue jacks.

Which Height?

whichheight.jpg

With the trailer hitched as you usually tow: - If there is 8" to 10" from the bottom of the outside jack tube to the ground use a 4" tall Flip jack foot. - If there is more than 10" from the bottom of the outside jack tube to the ground use a 6" tall Flip jack foot. General Rule Average height person with trailer coupled to tow vehicle: - If the top of your trailer frame sits above the bottom of your knee cap you probably need a 6" tall Flip jack foot. - If it sits below the bottom of your knee you probably need a 4" tall Flip jack foot.


ACCESSORIES
Camco Universal Flex Pads for Leveling Blocks - 8.5" x 8.5" - 2 Pack Camco Standard RV Level - 2 Pack Camco Stabilizer Jack Pads - Set Of 4 Camco Stabilizer Jack Pads - Rubber - 4 Pack
Price: $44.65
Price: $3.83
Price: $19.29
Price: $28.30
Camco 44600 Universal Flex Pads for Leveling Blocks - 8.5" x 8.5" - 2 Pack Camco 25523 Standard RV Level - 2 Pack Camco 44595 Stabilizer Jack Pads - 4 Pack Camco 44591 Stabilizer Jack Pads - Rubber - 4 Pack
Wheel Masters Level Master II RV Bubble Level Valterra Stackers EZ Leveler Jack Pads - 10 Pack AP Products Super Jack Pads - Set Of 4 Hopkins Level+Plus Trailer With Memory
Price: $30.28
Price: $48.95
Price: $59.16
Price: $16.13
Wheel Masters 67200 Level Master II RV Bubble Level Valterra A10-0918 Stackers EZ Leveler Jack Pads - 10 Pack AP Products 007-47257 Super Jack Pads - Set Of 4 Hopkins 05515 Level+Plus Trailer With Memory
RV Designer Stick On Bubble Level For RVs - 2 Pack
Price: $10.97
RV Designer E401 Stick On Level For RVs - 2 Pack