Home > Electrical > Battery Watering Systems >

Battery Check 12 Volt Deep Cycle Battery Caps With Water Level Monitor - 6-Pack

Ez Battery Check 6-12V Deep Cycle Battery Caps With Water Level Monitor - 6-Pack

Ez Battery Check Deep Cycle Battery Caps With Water Level Monitor - 6-Pack

Alternative Views:

Price: $18.75

MFG P/N: 6-12V
MFG: Ez Battery Check
UPC #: 869014000303

Quantity in Stock :

Availability: Out of Stock

No Longer Available

Description

The Ez Battery Check Deep Cycle Battery Caps With Water Level Monitor - 6-Pack are designed to fit 12V RV and Marine deep cycle batteries.

Monitor the water levels in your batteries without needing to remove them.
Features a visible gauge of the water level in each battery cell.
Each cap has a water fill port and can be refilled without removing the cap using an optional squeeze bulb or fill bottle (sold separately)
Caps fit 3/4" press fit style battery caps found on most all 12V deep cycle RV and Marine batteries sold in the US.
6-pack accommodates one (1) 12V battery.
Requires 2 1/4" clearance above the battery mounting surface.
1 Year Manufacturer Warranty

EZ Battery Check 12V Deep Cycle Battery Caps With Water Level Monitor - 6-Pack

Additional Product Information
Using Ez Battery Check Water Level Monitor

1. Ensure the battery is fully charged.
2. The battery's electrolyte level should be at the manufacturer's recommended level. Add distilled water if necessary. Do not over fill.
3. Remove the original vent caps and install the Ez Check Battery caps.
4. Note the level of the red float indicators and position the O rings even with the bottom of the red float indicators.
5. The Ez Check cap is now ready to be monitored. When the red float indicator drops below the O ring, remove the small black cap on the fill tube and slowly add distilled water to the cell until the red float indicator rises above the O ring.
6. Re-install the small black cap and you're done.

Batteries should be checked frequently to maintain the correct fluid levels.