The Dicor Corp AirGard Valve Stem Extenders are designed for the inner wheel in dual wheel applications, and will provide extra protection against tire deflation should the valve extender be damaged.
- Exclusive Live Stem inner core technology utilizes a floating valve system that activates only when air is added or removed from the tire.
- Live Stem pushes against the tire valve stem, allowing the tire to inflate or deflate.
- Long-lasting hydraulic Teflon hose combines with a heat-treated stainless braid that will not kink to ensure extra protection.
- Installation requires no special adjustment.
- Designed to fit 1992 to Current Ford E350 - 16″ - 8 Hand Hole and all
16″, 16.5″, 16.5″ and most 22.5″ except 1992 to current Ford E-350 wheel and Accuride 22.5″ Wheel No. 29028.
- Extender Length: 5-3/4".
- Weight: 1.5 lbs.
- Includes: (2) 5 3/4" Valve Extenders with caps & locking nuts, (2) 3 1/4" Stabilizing Brackets, (2) 5 1/2" Stabilizing Brackets
- Limited 90-Day Manufacturer Warranty.
Dicor Corp AirGard Valve Stem Extenders
1. Place valve extender through hand hole and thread onto inner wheel valve stem as shown.
2. Place center hole of stablilizer onto valve extender. Be sure flat side of stabilizer is facing outward (see diagram).
3. Slide one edge of stabilizer onto hand hole on wheel. NOTE: Stabilizer attaches to hand hole of wheel, not to the stabilizer.
4. Push stabilizer toward inside of wheel until other side can be secured on hand hole. NOTE: Pliers may be needed to complete this step.
|
