![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
The Concrobrium 425-1035 Mold Stain Eraser goes after embedded mold and mildew stains without any need for scrubbing. Fast acting solution removes stains and leaves behind no residue and no need for rinsing.
- Perfect for black mold stains.
- Color-safe and will not bleach your darker fabrics or surfaces.
- Best used on decks, patios, fences, walkways, railings, siding, gutter, roofs, tile, showers, bathrooms, basements, and outdoor furniture.
- Can be used on wood, composite wood, concrete, masonry, drywall, grout, stone, fiberglass, tile, plastic, laminate, aluminum, and metal.
- Contains no bleach, ammonia, or VOCs.
- Weight: 0.2 lbs.
Note: Mold Stain Eraser is not for use with a fogger. It will clog the fogger and damage it.
Concrobrium Mold Stain Eraser - 3.5 Oz.
|
|
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
Additional Product Information
How to Use 1. Ensure surface to be treated is free of debris. On external surfaces, pre clean with Concrobium House & Deck Wash to remove surface dirt and grime. 2. Add entire contents of container to 1 gallon (3.78L) of warm water in a bucket. For smaller jobs, adjust amounts accordingly. 3. Stir solution with mixing stick regularly to dissolve all powder. Wait at least 5 minutes before application. 4. Apply to target area in a thin even layer with a pump sprayer and allow product to sit on surface for a minimum of 3 hours. Do not rinse. Product must be applied within 1 hour of mixing for best results.
|
|
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif)
|