![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
The AP Products Non-Ribbed D-Seal are designed for use in many applications, including cargo doors, entrance doors, around windows, and many other locations where you may need to reduce noise, dust, moisture, and vibration.
- Mounts with PSA tape (pressure sensitive adhesive). Simply remove the backing and press down.
- EPDM sponge material is UV protected and weather resistant.
- Acetone works well to remove old residue from the D-seal.
- Note: if using acetone, test on an inconspicuous area first to make sure it will not harm the surface. Also, use caution if using near your RV, as acetone can damage exterior finishes.
- Ambient temperature must be above 60-degrees F during application.
- Good heat performance at -20 to 158 degrees F once installed.
- Roll Dimensions: 3/4" W x 1/2" H x 50 ft long.
- Tape Color: White.
- Weight: 3 lbs.
- Sold individually.
- Limited 1-Year Manufacturer Warranty.
AP Products Non-Ribbed D Seal With Tape - 3/4" x 1/2" x 50 Ft - Black
|
|
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/rvup2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/rvup2021/images/clear1x1.gif)
|