Bilstein 4600 Series Shock Absorber is designed specifically to help your Dodge / Freightliner / Mercedes Sprinter Van reach the ultimate in ride, performance and handling. A 4600 Series shock equipped vehicle delivers superior control compared to conventional shocks, allowing you to enjoy the road, mile after mile. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today. Sold individually.

• 46mm Monotube Shock Absorber
• Mounting Location: Rear Axle
• Adjustable: No
• Gas Charged: Yes
• Bushing Material: Rubber
• Bushing Color: Black
• Boot Included: Yes
• Boot Color: Blue
• Shock Diameter: 46mm
• Upper Mount: 14.1mm Eyelet
• Lower Mount: 14.1mm Eyelet
• Warranty: LIMITED LIFETIME WARRANTY
• Old Part Number: F4-BE5-H770-H0

Bilstein Dodge / Freightliner / Mercedes Sprinter Van - Rear Shock

Installation of shock absorbers requires special tools and expert knowledge. Accordingly, installation of all BILSTEIN products must be performed by a qualified suspension specialist.

Always use a chassis hoist for the installation of BILSTEIN products and make certain that the raised vehicle is securely attached to the hoist and/or supported to prevent the vehicle from slipping, falling, or moving during the installation process. If you choose to install any BILSTEIN product without the necessary special tools, expertise or chassis hoist, you may subject yourself to the risk of serious bodily injury or death.

If you elect not to use a chassis hoist please observe the following precautions:

• Make sure the vehicle is on level ground
• That all tires on the ground during installation are blocked to prevent movement
• That at least two tires are on the ground at all times
• That adequately secured safety stands (jack stands) are used to support the chassis
• NEVER get under the vehicle until you have checked to make sure all of these steps are performed