Home > Electrical > Battery Chargers >

WirthCo Plus 021-0128 Battery Charger
WirthCo 20069 Plus Battery Charger
WirthCo Plus Battery Charger
  
RV Battery Charger, RV Battery Maintainer, RV Accessories
Price: $89.23
MFG P/N: 20069
MFG: WirthCo
UPC #: 734357001280
SHIPS: In 1 Business Day

Quantity in Stock :15

Availability: In Stock
Qty:

Description Instructions
 
The WirthCo Plus is a 12 volt 1.25 Amp battery charger designed to extend performance and life of all types and sizes of batteries. Included is a quick connect harness for hard to reach areas. The battery will be ready and fully charged for you to use, when you need it.
  • Stong and cost efficient.
  • Light weight.
  • Case Type: table top.
  • Output Volts (DC): 12v.
  • Output Current (Amps): 1.25.
  • Input Voltage (AC): 100-132v.
  • Input Current (Amps): 0.5.
  • Minimum Battery Voltage: 3.
  • Operating Temperature: -4°F - 122°F.
  • Switches to float mode automatically when finished charging.
  • Safely charges and maintains:
    • Flooded/Deep Cycle.
    • Maintenance free/Sealed.
    • AGM/Gel.
  • There are four steps to charging initialization, bulk charge, absorption mode, and float mode.
  • Protection against short circuiting and reverse polarity.
  • Comes with:
    • 6' Power cord.
    • 6' DC cord.
    • 2' battery leads.
    • 2' quick connect ring terminal harness.
  • Dimensions: 4.875" L x 3.25"W x 2.875" H.
  • Manufacturers warranty: 10 year warranty.
Battery Charger Comparison Chart

WirthCo Plus Battery Charger
Additional Product Information
WirthCo Plus chargers are completely automatic and may be left connected to both AC power and to the battery that it is charging for long periods of time. The charger output power, voltage, and current depends on the condition of the battery it is charging. Battery Tender Plus chargers have 2 status indicator lights that provide a visual means to determine the operating mode of the charger and hence the condition of the battery connected to the charger. The two-colored status indicator lights are available to determine whether the charger is operating in one of the 3 primary charge modes: the bulk mode (full charge, constant current, battery is 0% to 85% charged), the absorption mode (high constant voltage, battery is 85% to 100% charged), or the storage/float maintenance mode (low constant voltage, battery is 100% to 103% charged). When the battery is fully charged, the green status indicator light will turn on and the charger will switch to a storage/maintenance charge mode. The Battery Plus charger will automatically monitor and maintain the battery at full charge.