The Wheel Masters Inflation Kit is a heavy-duty 2-ply rubber hose valve that attaches to your existing valve stem, allowing proper inflation and pressure checks in seconds. Each kit comes complete with everything you need for the specific wheel application.

• Hoses attach to the existing valve stem to allow proper inflation and pressure checks in seconds.
• Heavy-duty inflators are constructed of high-quality two-ply rubber tubing reinforced with a tough nylon braiding.
• Works with inner and outer tires on 16", 16-1/2" and 19-1/2" dual wheels.
• No need to remove the valve core.
• Lengths:
  • Straight Valve: 13"
  • 90-Degree Valve: 9-1/2"
• Weight: 1 lb.
• Includes (2) Straight hoses, (2) 90 Degree hoses, (4) Wheel cover mounts, and (4) Caps.
• Limited 90-Day Manufacturer Warranty.
• Made in the USA.

Wheel Masters 2-Ply Rubber Dual Tire 4-Hose Inflation Kit - Wheel Cover Mount - 16" To 19.5"

INSTALLATION:

The dual inflation kit easily mounts to the rear wheel liners on your truck. If used with wheel covers, mount the brackets and hoses of the inflation kit to your vehicle's rear wheels before installing the wheel covers.

1. Clip 2 of the included brackets to each rear wheel liner. If you're using the inflation kit with wheel covers, clip the brackets to each rear wheel. Be sure to align the brackets with the valve stem and a hand hole.
2. Attach the hoses with straight valve extenders to the valve stems on the inner tires.
3. Attach the hoses with 90-degree-angled extenders to the valve stems on the outer tires.
4. Run the hoses to the outer wheels and attach the hoses to the wheel cover brackets.
5. Screw on the valve caps.